|
Sheet-fed offset presses for flexible
production of high-quality printing products
As an answer to the world-wide demand for a reliable, uncomplicated
and profitable sheet-fed press, Solna also offers the well-proven
Solna 25 series. Over the years more than 26,000 Solna 25 units
have been installed. The Solna original design is now manufactured
in China by an ISO 9000 certified, state-of-the-art company
and sold and serviced by authorised Solna dealers worldwide.
New Features of the latest version, the new Solna 25 Automatic
are contributing to improved printing quality, easier operation
and shorter make-ready-time:
- Modern
PLC system
- Sequential
start-up sequence
- Electrically
controlled impression on
- Printing
units independently and electrically controlled by push
buttons
- Motorized
feeder and delivery piles
- Pull
side lay like the 64 Automatic series
- Safety
guards in conformity with EU directives
- IR.Dryer
and SPC system available on special request
|
|
SOLNA 125
|
| The
Single-Solour Press. Solid, Compact & Extremly
Easy To Operate
A
compact and operator-friendly press with easy
access to controls. A strudy and simple design
for easy maintenance and expert service by authorised
Solna dealers worldwide. The Solna 125 plus requires
low power consumption and little floor space.
Top
Printing Quality
The
proven 20-roller inking system ensures smooth,
even ink flow to the form rollers for extraordinarily
high quality reproduction. Sturdy construction,
small cylinders, bearer contact and large form
rollers ensure high quality dot sharpness and
top printing quality. |
|
Standard
Equipment
- Modern
PLC system
- Sequential
start-up sequence
- Electrically
controlled impression on
- Printing
units independently and electrically controlled
by push buttons
- Motorized
feeder and delivery piles
- Pull
side lay like the 64 Automatic series
- Safety
guards in conformity with EU directives
- IR.Dryer
and SPC system available on special request
- Inking
unit and cylinder guards
- Oil
drip pan
- Feeder
air cushion table
- Recirculating
dampening water
- Oil
pressure gauge
- Cover
for delivery drum, glass
- Powder
spray unit with compressor
- Blow
down fans in delvery unit
- Export
packing
- Layout
sheet
|
|
|
SOLNA
225
|
The Two-Colour Press. The Economic Way To
Step Up To Multi-Colour Printing.
A sturdy and simple design for easy maintenance.
Its compact size simplifies changeover and
makeready and makes the Solna 225 Automatic
perfect for tackling short- to medium-run jobs.
Dot-for-Dot Fidelity
The quality of the print depends very much
on fine dot-for-dot fidelity. All presses in
the Solna 25 Automatic series have small cylinders,
bearer contact and large form rollers, which
ensure high quality dot sharpness.
Multi-Colour Quality
The Solna 225 Automatic adds multi-colour
capability to the productivity and profit potential.
Whether it is for print-for-profit or in-plant,
a well deserved reputation for high print quality
will add to job opportunities. |
|
Standard
Equipment
- Modern PLC system
- Sequential start-up sequence
- Electrically
controlled impression on
- Printing units
independently and electrically controlled
by push buttons
- Motorized feeder and delivery
piles
- Pull side lay like the 64 Automatic
series
- Safety guards in conformity
with EU directives
- IR.Dryer and SPC system
available on special request
- Inking unit
and cylinder guards
- Oil drip pan
- Feeder air cushion table
- Pre-loading trolley
- Recirculating dampening
water
- Underpacking gauge
- Oil pressure gauge
- Cover for delivery drum,
glass
- Powder spray unit with compressor
- Blow down
fans in delvery unit
- Export packing
- Layout sheet
|
|
|
SOLNA
425
|
The Four-Colour Press. All The Flexibility
For Larger Assignments.
When it is time to capitalize on the opportunities
of four-colour work, few presses can compete
with the Solna 425 Automatic. It has a plate-to-press
pin register for fast and accurate makeready.
It is also a truly economical press, allowing
you four-colour printing in one easy-to-set-up
pass. With the Solna 425 Automatic you discover
quality and performance normally found only
in larger, more expensive presses.
High-Pile DeliveryThe Solna 425 Automatic can be supplied with
high-pile delivery and dryer. The high-pile
delivery will permit not only longer runs,
but is also capable of handling a number of
smaller jobs without a change of pile.
The Solna Press Control system SPC is available
on this press. |
|
Standard
Equipment
- Modern PLC system
- Sequential start-up sequence
- Electrically
controlled impression on
- Printing units
independently and electrically controlled
by push buttons
- Motorized feeder and delivery
piles
- Pull side lay like the 64 Automatic
series
- Safety guards in conformity
with EU directives
- IR.Dryer and SPC system
available on special request
- Inking unit
and cylinder guards
- oil drip pan
- Feeder air cushion table
- Pre-loading trolley
- Recirculating dampening
water
- Underpacking gauge
- Oil pressure gauge
- Cover for transfer drum,
glass
- Cover for delivery drum, glass
- Decurler
- Powder spray unit with compressor
- Blow down
fans in delvery unit
- Export packing
- Layout sheet
|
|
|
SOLNA
525
|
The Five-Colour Press. Even Greater Potential
To Handle A multitude Of Jobs.
The ultimate Solna 525 Plus helps printers
to achieve greater flexibility and to handle
all jobs within the A2-range. The fifth colour
enables one-pass four-colour printing with
matched company colours, metallic inks or varnishes.
You can also separate text for printing different
copy or language versions.
Like the Solna 425 Automatic, the Solna 525
Automatic can be supplied with high-pile delivery
and dryer.
The Solna SPC system is also available on
this press. |
|
Standard
Equipment
- Modern PLC system
- Sequential start-up sequence
- Electrically
controlled impression on
- Printing units
independently and electrically controlled
by push buttons
- Motorized feeder and delivery
piles
- Pull side lay like the 64 Automatic
series
- Safety guards in conformity
with EU directives
- IR.Dryer and SPC system
available on special request
- Inking unit
and cylinder guards
- Oil drip pan
- Feeder air cushion table
- Pre-loading trolley
- Recirculating dampening
water
- Underpacking gauge
- Oil pressure gauge
- Cover for transfer drum,
glass
- Cover for delivery drum, glass
- Decurler
- Powder spray unit with compressor
- Blow down
fans in delvery unit
- Export packink
- Layout sheet
|
|
|
| |
SOLNA 125 |
SOLNA 225 |
SOLNA 425 |
SOLNA 525 |
| Running
Speed |
8000
iph |
8000
iph |
8000
iph |
8000
iph |
| Sheet
Size (max.) |
483
x 640 mm |
483
x 640 mm |
483
x 640 mm |
483
x 640 mm |
| Sheet
Size (min.) |
210
x 250 mm |
210
x 250 mm |
210
x 250 mm |
210
x 250 mm |
| Board
Size (max.) |
475
x 640 mm |
475
x 640 mm |
475
x 640 mm |
475
x 640 mm |
| Stock
Thickness (max.) |
0.6
mm |
0.6
mm |
0.6
mm |
0.6
mm |
| Stock
Thickness (min.) |
0.04
mm |
0.04
mm |
0.04
mm |
0.04
mm |
| Printing
Area (max.) |
474
x 635 mm |
474
x 635 mm |
474
x 635 mm |
474
x 635 mm |
| Feeder
Capacity |
800
mm |
800
mm |
800
mm |
800
mm |
| Delivery
Capacity |
500
mm |
500
mm |
500
mm |
500
mm |
| Delivery
Capacity, High Pile |
- |
- |
1000
mm |
1000
mm |
|
|
|
|
